What is the cleaning process of ultrasonic cleaning machine?

The structure and effect of various ultrasonic cleaning machines may be different, but the main process steps are the same. Each actual operation stage is important, which can not be ignored, and the actual operation must be completed as required to ensure the ideal cleaning effect.

The main cleaning process of the ultrasonic cleaning machine is cold and wet soaking, that is, the workpiece is immersed in the cleaning solution at 50 ~ 60 degree , and the workpiece is preliminarily cleaned. Therefore, the significance of this is very simple, that is, to reduce the time of ultrasonic cleaning and improve the cleaning quality.

After this, it is regarded as an ultrasonic cleaning machine. The ultrasonic transducer is immediately assembled at the bottom of the cleaning tank, and the external ultrasonic transducer forms a perfect ultrasonic cleaning machine. Then, the workpiece is ultrasonically cleaned with the cleaning liquid at 40-50 degree .

Next, spray and clean the antirust water, and clean the workpiece according to the nozzle. One is to remove the cleaning liquid on the surface of the workpiece, and the other is to prevent rust.

Since a large amount of water droplets will appear on the surface of the workpiece after ultrasonic cleaning, if it is immediately put into the drying channel for drying treatment, liquid mercury will be left on the surface for a long time. Therefore, the tank can be dried first, the water on the surface of the workpiece can be gently blown by a centrifugal fan, and then it enters the drying channel for drying treatment.

The drying channel contains heating pipes and external wall insulation materials. Therefore, according to the exhaust method at the bottom of the centrifugal fan and the air supply method at the top, warm air circulation is generated to make the working temperature in the drying channel evenly distributed, and then the workpiece cleaned by the ultrasonic cleaner is dried.